Operating specifications for carpet cleaning:
Including blended, pure wool and chemical fiber carpets, tapestries, bed carpets, decorative carpets, etc. Carpet treatment is a multi-functional machine cleaning machine, dust suction machine, combined with special disinfection and decontamination agents to kill mites, sterilize, foam cleaning and decontamination of carpet steam, dust suction machine to absorb sewage, air dry and comb.
Tools and materials:
1、 Water pumping and washing:
Operation method:
1. Use a vacuum cleaner for overall dust collection;
2. Dilute the detergent and inject it into the water tank;
3. Spray detergent on the carpet;
4. After 10-15 minutes, the stain will separate from the fiber;
5. Use the floor washing machine for pumping and washing. The operation moves backward so that each operation line has a part of overlap. At least two times of pumping and washing are required;
6. At the same time of cleaning the carpet, use a water suction machine to absorb the cleaned carpet;
7. Let the carpet dry completely. To speed up the drying of the carpet, start the carpet dryer.
2、 Dry bubble cleaning:
Operation method:
1. Use a vacuum cleaner for overall dust collection;
2. Local treatment is to use special detergent to treat oil stains, fruit stains and coffee stains on the carpet separately;
3. Dilute the carpet foam cleaner and inject it into the foam box;
4. Handle carpet edges, corners and places pushed by the machine with a hand brush;
5. Use a single plate sweeper equipped with a bubbler and a carpet brush to dry the carpet;
6. Act for a while, then repeat;
7. Carpet combs or rakes comb carpet cilia, which is very important for the appearance of carpets, especially cotton carpets with long fibers, and can accelerate the drying of carpets;
8. Let the carpet wool dry completely;
9. Use a vacuum cleaner to remove dirt and dry blistered crystals. | 
