In interior decoration, the maintenance of floor waxing can be done by waxing or painting. Whether it is the floor used at home or in the office, if it was originally waxed (the original paint was another process), even if the original waxing process was done very well, if the floor was naturally weathered or artificially damaged for a long time, such as the friction of high heels, the wax layer on the floor would fall off, and the gloss of the floor would be greatly reduced. If you want to maintain the original gloss, you must wax again. After waxing, the gloss of the floor increases, which can also prevent the floor from premature weathering, waterproof and easy to clean. At present, the floor wax mainly uses non polishing wax, which is easy to construct, evenly applied and has high brightness, and is deeply loved by GF users.

Floor waxing is to apply a layer of wax on the surface of solid wood floor, PVC (plastic) floor, stone floor (marble, granite, terrazzo), etc. after the wax is cured, it can isolate air, moisture and dust, and play the role of anti-skid, anti-wear and anti-static, so as to better maintain the floor and prolong the service life of the floor. Waxing is divided into two types: solid wax and liquid wax. The floor waxing shall be performed by professionals. The wax layer and wax liquid shall be evenly distributed with moderate thickness, so as to achieve the effect of bright and clean floor.

Ground analysis:

1. Hard ground granite, marble, terrazzo (the effect of two coats of bottom wax and surface wax is better), mirror tiles, porcelain tiles and glazed tiles (the wax effect is not good, and it is easy to fall off)

2. Soft ground rubber flooring series, PVC flooring series 3, wood flooring series solid wood flooring, composite flooring

Note: if waxing treatment is required for soft ground and wood floor series, it is better to use polishing free high gloss wax without polishing.

Introduction to floor waxing process

Tools: floor carpet cleaning machine, water suction machine, high-speed polishing machine, air dryer, wax mop or slot clip, towel, water press car, work sign and rag, etc.

Medicament: high speed polishing surface wax, bottom wax, non polishing surface wax, ground cleaner (acid cleaner, energy water) or waxing water, neutral cleaner.

Waxing the floor can decontaminate and polish, increase beauty, and prevent insects, moisture, cracking, and prolong the service life of the floor. It is a necessary measure for floor maintenance. For solid wood, plastic floor, marble, terrazzo, granite, mirror tiles, etc., a layer of protective wax is coated on their surfaces, and after curing, they are isolated from air, water, dust, anti-skid, anti-static, anti-wear, and easier to clean, so as to prolong the service life of the floor.

Function of waxing

Remove the stubborn stains on the floor, isolate the material itself from the air by waxing, reduce the damage to the material caused by oxidation or contact with harmful substances in the air, and achieve the purpose of prolonging the service life of the material and making it beautiful and bright. More importantly, the mirror bright surface formed by it is particularly durable, which can prevent detergent, scratches, sliding, heel friction and other injuries. At the same time, after polishing, the wax surface is smoother, harder and more durable.

Operating procedures for waxing

1. Dust collection

In addition to the attachments on the floor surface and some adhesives, adhesives, cement, paint spots, etc

2. Cleaning

Electric mop, sauna, sterilization, cleaning, no damage to the floor

3. Waxing

Different waxes are applied to different floors

4. Polishing

Professional operation + polishing machine completion

Waxing method of wood floor

If the waxing method is improper, there will be whitening, circle marks, and discoloration. When maintaining the floor waxing, be sure to read the following notes.

1. waxing in sunny days

High humidity and waxing in rainy days will produce white turbidity.

When the room temperature is below 5 ℃, the floor wax will harden.

Before waxing, do not use a cloth containing chemicals to wipe the floor, which will cause poor adhesion of floor wax.

2. remove dirt from the floor surface

Use a vacuum cleaner to remove rubbish and dust from the floor surface.

Wipe the stains on the floor with diluted neutral detergent.

Stains that are difficult to remove can be wiped with sina water.

In order to prevent detergent from accumulating in the groove, the cloth soaked with detergent shall be wrung dry as much as possible.

Floor wax remover will cause marks and swelling on the floor. It must not be used.

3. wipe with a damp cloth

Wipe with a cloth that has been forced to dry.

The floor surface, especially the groove part, shall be carefully wiped without residual detergent.

If there is residual detergent and water, it will cause the surface to whiten and swell.

4. fully dry

Wax the floor surface and groove after the water is completely dry. According to different seasons, the time required also changes, but it will take more than half a day.

If it is not fully dried, the floor wax will not closely adhere to the floor surface, affect the appearance and produce whitening.

5. waxing

Shake the container containing the floor wax and stir well.

Before the overall waxing of the floor of the room, local trial shall be carried out at the corners of the room and other inconspicuous places to confirm whether there is any abnormality.

In order to prevent the floor wax from polluting the wall skirting line and furniture, the above parts shall be covered with adhesive tape paper.

Fully dip the floor wax with a clean cloth to prevent dripping.

Do not pour the floor wax directly on the floor, otherwise marks and circle marks will occur.

Carefully apply according to the wood grain direction of the floor, without omission or uneven thickness.

Too little application will lead to uneven thickness, and too much application will lead to poor film formation.

Keeping thin and uniform is the key to waxing.

Do not dilute floor wax with water.

The waxing tool can use special waxing mop, which is easy to operate and has ideal effect.

Waxing is divided into: solid wax and liquid wax; It is waxed by professionals. The wax liquid is evenly distributed, moderate in thickness, bright and beautiful.

Reasons for floor waxing: 1. Protect stone and floor; 2. Increase aesthetics; 3. Antiskid; 4. Easy to clean:

Floor waxing cost: 1. Machine waxing: 5-30 yuan / square meter 2. Liquid waxing: 3-15 yuan / square meter 3. PVC cleaning and waxing: 2-10 yuan / square meter;

Beijing floor waxing center;